5 Best Additives for Burning Oil – Improve Performance and Efficiency Today

If you've been skeptical about the effectiveness of additives for burning oil in your vehicle, it's time to reconsider. Enhancing your engine's performance and efficiency can be as simple as incorporating the right additives into your routine maintenance.

These top 5 additives have been carefully selected based on their proven track record and positive customer feedback. Each one offers unique benefits that can help address common issues related to oil consumption and engine wear.

Let's explore how these additives can transform your driving experience and prolong the life of your vehicle's engine.

BG Advanced Formula MOA 115

For those seeking to extend their engine's life and prevent issues like sludge and varnish buildup, the BG Advanced Formula MOA 115 is the ideal choice. This additive not only reduces wear but also prevents excessive oil consumption, keeping piston rings from sticking. Users have reported resolving ticking lifter noise in vehicles like the Chevrolet Cruise and eliminating engine noise in the Toyota Tacoma.

The BG Advanced Formula MOA 115 has shown to improve gas mileage and engine efficiency, quiet engine noise in high mileage Audis, and ensure no additional oil is needed between changes. Consistent usage over the years has proven its reliability and effectiveness, making it a highly rated product that consistently enhances engine performance and longevity.

Best For: Those looking to prolong their engine's lifespan while preventing issues like sludge and varnish buildup.


  • Extends engine life
  • Reduces wear
  • Prevents excessive oil consumption


  • May be pricier compared to some other engine additives

Liqui Moly MoS2 Anti-Friction Engine Treatment (SKU: 2009)

Enhance your engine's performance and reduce noise with the Liqui Moly MoS2 Anti-Friction Engine Treatment (SKU: 2009), a high load-bearing lubricant film that boosts smoothness and efficiency. This 300 ml can product from Liqui Moly creates a durable lubricant film on friction surfaces, improving engine sound and control at high RPM while reducing vibration and ticking noises. With a flash point of 181.0 degrees Celsius, this German-made engine treatment enhances engine noise and performance, resulting in quieter operation during startup.

Users have reported positive experiences, highlighting improved engine smoothness, reduced noise levels, and enhanced fuel efficiency. Try Liqui Moly MoS2 Anti-Friction Engine Treatment (SKU: 2009) for a noticeable difference in your vehicle's performance and noise reduction.

Best For: Those looking to enhance their engine's performance and reduce noise levels without significant modifications.


  • Improved engine sound and control at high RPM
  • Reduced vibration and ticking noise in engines
  • Enhanced fuel efficiency and smoother engine operation


  • May not provide drastic improvements for severely worn engines

Motorkote Heavy Duty Hyper Lubricant Engine Treatment, 32-Ounce

The 'Best Additives for Burning Oil' standout choice for those seeking to enhance engine performance and longevity is the Motorkote Heavy Duty Hyper Lubricant Engine Treatment, 32-Ounce. This premium heavy-duty friction fighter works with all synthetic and petroleum-based oils for gas or diesel engines, making it versatile for various vehicles and machinery. It's known to increase horsepower, lower operating temperatures, and reduce engine noise and vibration.

The formulation bonds to metal surfaces, extending engine life and improving fuel economy without requiring heat for activation. With no solids, it can be added at any time without altering SAE ratings or voiding warranties. Users have reported positive feedback, highlighting quieter operation, improved performance, and increased fuel economy.

Best For: Those looking to enhance engine performance and longevity in a wide range of vehicles and machinery.


  • Increases horsepower and lowers operating temperatures.
  • Reduces engine noise and vibration for quieter operation.
  • Improves fuel economy without requiring heat for activation.


  • May not be compatible with all engine types.

Archoil AR9100 Oil Additive for All Vehicles (16oz)

With its ability to treat various engine components and reduce wear, Archoil AR9100 Oil Additive stands out as a top choice for those seeking enhanced performance and longevity in their vehicles. This 16oz additive is suitable for diesel and gasoline engines, gearboxes, hydraulics, differentials, and power steering systems. It not only reduces wear but also extends the life of crucial components. Users have reported benefits such as reduced engine noise, vibration, and heat, along with smoother acceleration and improved cold start performance. Particularly effective for Power Stroke engines, including fixing cold start injector issues in 6.0L and 7.3L models, this friction modifier also improves fuel efficiency and extends oil life. Despite its premium cost, users find the investment worthwhile for the long-term benefits and performance improvements it offers.

Best For: Those looking to enhance the performance and longevity of their diesel or gasoline engines, gearboxes, hydraulics, differentials, and power steering systems.


  • Reduces engine noise, vibration, and heat
  • Improves fuel efficiency
  • Extends oil life


  • Premium cost may be a deterrent for some

Lubegard 30901 Bio/Tech Engine Oil Protectant, 15 oz.

For those seeking to optimize engine performance and extend oil life by 30%, the Lubegard 30901 Bio/Tech Engine Oil Protectant, 15 oz., is a top choice. This product is designed to enhance engine horsepower, improve fuel economy by reducing friction, and extend the lifespan of your oil.

By reducing wear on metal components and eliminating lifter noise on startup, it ensures smoother running engines and improved anti-friction properties. Additionally, the Lubegard 30901 Bio/Tech Engine Oil Protectant helps in reducing oil and fuel consumption, lowering hot engine oil temperatures, and inhibiting oxidation.

With positive user experiences highlighting improved transmission performance, increased engine lifespan, and enhanced fuel efficiency, this product stands out for its effectiveness in maintaining and enhancing your engine's performance.

Best For: Those looking to optimize engine performance, reduce friction, and extend oil life in their vehicles.


  • Enhances engine horsepower and performance
  • Improves fuel economy
  • Reduces wear on metal components


  • May not be compatible with all engine models

Factors to Consider When Choosing Additives for Burning Oil

When selecting additives for burning oil, you need to consider specific criteria such as:

  • The causes of oil burning
  • Proper application techniques
  • Checking engine compatibility
  • Monitoring performance

Understanding these factors will guide you in choosing the right additive to address your oil burning issues effectively. It's essential to follow these guidelines to ensure optimal results and maintain your engine's performance.

Additive Selection Criteria

Consider the specific needs of your engine when selecting an additive for burning oil. Evaluate the type of engine you have and its requirements to choose the most suitable additive. Opt for additives that work well with both synthetic and conventional oils to ensure compatibility. Look for products that promise advantages like reducing oil consumption, enhancing engine performance, and decreasing wear and tear.

Prioritize additives with a good reputation, positive user reviews, and compatibility with your vehicle for optimal outcomes. Select additives with a proven track record of reducing engine noise, boosting fuel efficiency, and prolonging the life of your engine. Making an informed choice based on these criteria can help you improve your engine's performance and efficiency.

Oil Burning Causes

Examine the root causes behind oil burning in your engine to effectively select additives that address these specific issues. Worn piston rings, valve seals, or cylinder walls are common culprits of oil burning. Additionally, leaking gaskets or seals can contribute to this problem.

Overheating the engine is another factor that can lead to oil burning issues. Poor maintenance practices, like infrequent oil changes, can also accelerate oil burning. Furthermore, using the wrong type or grade of oil can exacerbate oil burning problems.

Application Techniques

To ensure optimal results when selecting additives for combating burning oil, focus on mastering proper application techniques that facilitate even distribution in your engine oil. Following manufacturer instructions for mixing or direct application is crucial for optimal results.

Applying additives during an oil change can enhance their effectiveness in combating burning oil issues. Ensure the engine is at operating temperature before adding the additive to facilitate proper mixing and dispersion. Using the recommended dosage based on the engine size and oil capacity is essential for achieving desired outcomes.

Engine Compatibility Check

When selecting additives to combat burning oil, ensure compatibility with your engine type, whether gasoline, diesel, or hybrid. It's crucial to verify if the additive is suitable for the specific components in your engine, such as seals, gaskets, and catalytic converters.

Make sure the additive meets the manufacturer's specifications to prevent voiding any warranties. Additionally, consider any potential interactions with existing additives or treatments in your engine to avoid any adverse effects.

Look for additives specifically designed to address the issue of burning oil, like those that reduce oil consumption or improve lubrication. By taking these factors into account, you can choose the right additive that's safe and effective for your engine.

Performance Monitoring Tips

Monitoring your oil consumption regularly and observing exhaust smoke color and intensity are crucial factors to consider when selecting additives for burning oil. By keeping track of oil levels, you can quickly identify any unusual changes that may indicate oil burning issues.

Additionally, paying attention to the color and intensity of exhaust smoke can provide valuable insights into the efficiency of your oil combustion. Checking for oil leaks under the vehicle and monitoring engine performance for signs like misfires or rough idling can also help pinpoint oil burning issues.

For a more in-depth analysis, consulting with a mechanic for diagnostic tests such as a compression test can provide further clarity on the health of your engine and oil consumption levels.

Dosage and Frequency

Consider the severity of the burning oil issue when determining the appropriate dosage needed for effective treatment. To avoid overuse or underuse of additives, follow the manufacturer's recommendations for dosage and frequency.

Some additives may require more frequent application initially to address the problem before transitioning to maintenance doses. Monitoring oil consumption and engine performance post-additive use can guide adjustments to dosage or frequency.

For specific guidance tailored to your vehicle's needs, consult with a mechanic or refer to the additive's instructions. By adhering to the recommended dosage and application schedule, you can optimize the additive's effectiveness in combating burning oil issues while enhancing your engine's performance and efficiency.

Temperature Impact Assessment

Assessing the impact of temperature is crucial when selecting additives to address burning oil issues in your engine. It's important to evaluate how additives influence the operating temperature of your engine.

Look for additives that help regulate heat to prevent overheating and maintain peak performance. Opt for products that can reduce friction and heat generation, ultimately enhancing engine efficiency.

Effective additives can lower overall temperature levels, contributing to the longevity of your engine. When choosing additives, prioritize those with thermal stability, as they can significantly improve temperature management within the engine.

Long-Term Results Tracking

To effectively evaluate the impact of additives on reducing oil consumption over time, focus on tracking long-term results for enhanced insights into engine performance and efficiency. Monitoring changes in oil consumption and engine performance can provide valuable indicators of the additive's influence on overall engine health and efficiency.

Consistent tracking allows for adjustments in additive usage or maintenance practices based on observed trends or patterns, ensuring optimal performance. Long-term data also aids in assessing the cost-effectiveness of using the additive to manage oil burning issues efficiently.

Moreover, tracking results over time offers valuable insights into the additive's ability to sustain engine cleanliness, reduce wear, and contribute to prolonging the engine's lifespan.

Frequently Asked Questions

Are These Additives Safe to Use in All Types of Engines, Including Older or High-Mileage Vehicles?

Yes, these additives are safe for all engine types, including older or high-mileage vehicles. They are designed to improve performance and efficiency by reducing oil consumption and enhancing lubrication, benefiting your engine's longevity.

Can These Additives Help Reduce Oil Consumption in Vehicles That Are Prone to Burning Oil?

Using additives can help reduce oil consumption in vehicles prone to burning oil. They can improve lubrication, reduce friction, and prevent deposits, ultimately enhancing engine performance and efficiency. It's a cost-effective solution for maintaining your vehicle.

How Often Should These Additives Be Used for Optimal Performance and Efficiency?

For optimal performance and efficiency, use these additives regularly. Follow the manufacturer's recommendations for the best results. Consistent use will help maintain your vehicle's engine health and improve its overall performance.

Are There Any Known Compatibility Issues With Using These Additives Alongside Other Engine Treatments or Oil Products?

When using additives with other engine treatments or oil products, ensure compatibility by checking manufacturer guidelines. Mixing incompatible additives may reduce effectiveness or cause harm to your engine. Verify before combining to maintain optimal performance.

Do These Additives Have Any Long-Term Benefits for Engine Health and Longevity, Beyond Just Improving Performance in the Short Term?

Using additives can provide long-term benefits for your engine's health and longevity. They help reduce wear and tear, prevent corrosion, and maintain optimal performance over time. Regular use can extend the lifespan of your engine.


In conclusion, choosing the right additives for burning oil can greatly improve the performance and efficiency of your vehicle. Options like BG Advanced Formula MOA 115, Liqui Moly MoS2 Anti-Friction Engine Treatment, Motorkote Heavy Duty Hyper Lubricant Engine Treatment, Archoil AR9100 Oil Additive, and Lubegard Bio/Tech Engine Oil Protectant can ensure your engine is running smoothly and efficiently.

Consider these factors when selecting the best additive for your vehicle to keep it running at its best.